advertisement
Household robot vacuum cleaner manufacturerECOVACS” released on October 10, 2024 “DEEBOT N30 PRO OMNI” is a set that includes a robot vacuum cleaner that can not only suck up dirt but also mop with water, and a convenient station that automatically cleans and dries the mop while collecting the dirt collected by the vacuum cleaner. It has become. There is also a coupon that will give you a 5000 yen discount for a limited time until Sunday, November 10, 2024, and a GIGAZINE special coupon code that will give you an additional 5% OFF, so I will actually use it and review what kind of vacuum cleaner it is. I decided to check it out.
Amazon | ECOVACS DEEBOT N30 Pro OMNI Robot Vacuum Cleaner Dual-use Wet Wiping 10000Pa Strong Suction Edge Cleaning Detangling System 2.0 Automatic Garbage Collection Fully Automatic Mop Drying Automatic Water Supply Mop Hot Water Washing Mapping Obstacle Avoidance Zero Tangle Powerful Suction App Operation Dropping/ Anti-collision Alexa Compatible Cleaning Reservation Cleaning Robot White | ECOVACS | Robotic Cleaner
https://www.amazon.co.jp/dp/B0DFMDRNYQ
·table of contents
◆1: Opening and checking contents
◆2: Preparation for use
◆3: Actual cleaning scene and movie
◆4: Summary
The following article provides a detailed summary of what you will find when you open the DEEBOT N30 PRO OMNI box, how the main unit and station are configured, and how you will actually use it. If you just want to see how it works, click◆3: Actual cleaning scene and moviePlease skip to the item “.
◆1: Opening and checking contents
The outer box looks like this.
When I opened it, a quick start guide was written.
When you take out the contents from the outer box, you will find the robot vacuum cleaner, a fully automatic cleaning station, a base to attach to the station, a tank for collecting waste water and a tank for cleaning water, a power cord for the station, a side brush, and an instruction manual. Ta.
This is what the robot vacuum cleaner body looks like. The diameter is approximately 35cm, and the height at the highest point is approximately 10cm.
The actual weight without the brush is 3.8kg.
The part that protrudes at the top of the front side is a sensor for “True Mapping 2.0” that maps the cleaning area, and in front of it are various operations such as “end button”, “power button”, and “spot cleaning start / end button” It has a button.
The front is equipped with a sensor that can avoid collisions by scanning obstacles in real time in 3D while driving. It is also equipped with an “edge sensor” on the side.
On the back is a sensor, charging terminal, and water supply port.
Lifting up the rubber lid reveals a dust outlet that functions when docked with the station.
When you remove the top protective cover, there is a dust box in the center as well as a QR code for app collaboration.
The dust box can also be removed and cleaned.
If you turn it over, you can see the drive wheel for running and the hole for setting the brush.
The main brush is installed in the center of the back. According to ECOVACS, the brush is equipped with a unique hair removal function “ZeroTangle 2.0”, which allows hair to be suctioned smoothly without getting tangled with the brush.
The mop pad is attached to the main unit from the beginning.
The stations for charging and cleaning are shown below. The size excluding the tank is 34 x 48.5 x 54 cm.
The back looks like this.
When the front cover was removed, there was a dust box installed inside to collect dust.
A clean water tank and a sewage tank are already set.
The actual weight with the empty tank and base attached was 7.85 kg.
◆2: Preparation for use
Let’s start preparing to use DEEBOT N30 PRO OMNI. First, plug the power cord into the back of the station.
Then, insert the plug into the outlet. Furthermore, ECOVACS recommends connecting a ground wire.
Do not place anything in the space 50cm on each side of the station and 80cm in front of the station. Also, if there is a mirror or other object that reflects light near the station, it is necessary to cover the bottom 14 cm.
Fill the cleaning tank with water and set it. The tank capacity is approximately 4.5L.
Insert the side brush into the slot on the back of the vacuum cleaner until it clicks.
This is what it looks like when the side brush is installed.
Additionally, install the smartphone app “ECOVACS HOME” for operation. The app hasiOS versionandAndroid versionThere is.
For details on how to install the app and initial settings, please refer to the DEEBOT T10 OMNI review article below.Preparation for useIt is explained in the section “.
[25% OFF for a limited time]Review of ECOVACS “DEEBOT T10 OMNI”, a powerful robot vacuum cleaner that can easily avoid obstacles, suck up dirt, and wipe with water with a mop, and a station that automatically performs trash collection, mopping, and drying -GIGAZINE
When preparations are complete, press and hold the power button on the DEEBOT N30 PRO OMNI main unit.
If you read the QR code on the main unit from the ECOVACS HOME app, link it, and proceed with the settings according to the steps, the main unit will automatically return to the station.
DEEBOT N30 PRO OMNI is a mapping robot vacuum cleaner that understands the room layout and obstacles in advance and cleans along the optimal route. First, tap “Enter” on the home screen.
If you have not yet mapped the cleaning area, tap “Map your home” from the app.
Read the instructions carefully and tap “Start mapping”.
Then DEEBOT N30 PRO OMNI will automatically complete the mapping. For a room of approximately 44 square meters, mapping was completed in just 2 minutes.
◆3: Actual cleaning scene and movie
Below is a video of DEEBOT N30 PRO OMNI being actually cleaned. DEEBOT N30 PRO OMNI is equipped with a high-precision obstacle sensor, so it can move smoothly between obstacles such as desks and chair legs, cleaning even the smallest details. .
ECOVACS’ robot vacuum cleaner “DEEBOT N30 PRO OMNI” can clean even in narrow spaces – YouTube
While changing directions repeatedly, carefully clean between the legs of chairs and desks that are hard to reach.
It rarely hits obstacles hard.
In addition, you can check the route that DEEBOT N30 PRO MINI cleans in real time from the ECOVACS HOME app.
DEEBOT N30 PRO OMNI allows you to change the suction power from the app to 4 levels: “Quiet”, “Standard”, “Strong”, and “Maximum +”. Maximum suction power is 10,000PaIt is said that it is highly effective in sucking out dust and other particles hidden in carpets.
I actually switched the suction power of DEEBOT N30 PRO OMNI and compared how much the sound during cleaning changed.
DEEBOT N30 PRO OMNI is capable of not only suction cleaning like a regular vacuum cleaner, but also mopping with water, and you can switch the cleaning mode from the app. If you don’t want to wipe with water, you can select “Suction only”, and if you want to wipe with water, you can select your favorite mode from “Water wiping”, “Mop after vacuuming”, or “Suction and mopping”. Masu.
When wiping with water, water may remain on the floor immediately after cleaning begins. However, as I continued cleaning, there were no more water droplets left behind, and I was able to wipe properly.
If you are concerned about how much water is left, you can adjust the amount of water contained in the mop in three levels: “Low”, “Medium”, and “High”.
In addition, the DEEBOT N30 PRO OMNI is equipped with a feature called “TruEdge”, which allows the mop pad to extend to expand the cleaning range, while also allowing it to be used in conjunction with the side brush to clean areas near walls and corners of the room, which are the weak points of circular mops. can be thoroughly cleaned.
In the video below, you can see how DEEBOT N30 PRO OMNI cleans walls and corners of the room.
How ECOVACS’ robot vacuum cleaner “DEEBOT N30 PRO OMNI” cleans the corner of the room – YouTube
To conduct the test, we scattered paper scraps in the corners of the room that are difficult for the robot vacuum to clean.
Then I set DEEBOT N30 PRO OMNI to “Suction and mop” and let it pass through there. The suction power is “Standard” and the water amount is “Medium”.
The results are as follows. The amount of paper waste that was collecting in the corners has visibly decreased.
Furthermore, the DEEBOT N30 PRO OMNI not only can overcome steps up to 20 mm, but also has a function that automatically lifts the mop to perform suction when it recognizes a part of the carpet when mopping. . This way, you don’t have to worry about getting your carpet wet when wiping with water. The video below shows the DEEBOT N30 PRO OMNI actually recognizing the carpet while mopping, lifting the mop and switching to suction only.
After cleaning, the DEEBOT N30 PRO OMNI automatically returns to the station and performs everything automatically, from charging to vacuuming dirt, cleaning the mop, and drying the mop with warm air. DEEBOT N30 PRO OMNI washes with hot water at 60℃ and dries with hot air at 40℃, making it possible to reduce oil stains and unpleasant odors from half-drying.
You can see how the DEEBOT N30 PRO OMNI is fully automatically maintained after returning to the station by watching the video below.
After cleaning at the station, the water in the clean water tank decreases and dirty water accumulates in the waste water tank.
It is recommended that parts such as the DEEBOT N30 PRO OMNI’s side brush, mop pad, and dust box filter be regularly maintained and replaced.Official websiteIt is possible to purchase new parts from.
◆4: Summary
DEEBOT N30 PRO OMNI is capable of suctioning dirt and wiping with water, and can easily complete everything from cleaning to finishing automatically. In addition, you can easily customize the cleaning mode by using the dedicated app “ECOVACS HOME”, as well as features such as a strong suction force of 10,000 Pa, a TruEdge function that extends the mop pad, and the ability to smoothly traverse steps up to 20 mm. This is a highly efficient product. In addition, by using a station that can fully automatically charge the main unit, collect garbage, wash the mop with water, dry it with hot air, etc., you can easily complete the troublesome maintenance after cleaning. is.
The regular price of DEEBOT N30 PRO OMNI is 99,800 yen including tax, but at Amazon.co.jp you can get a coupon that allows you to get 5000 yen off the regular price for a limited time until November 10, 2024. It’s possible. In addition, we have issued a coupon for an additional 5% OFF until November 20, 2024, exclusively for GIGAZINE readers. The GIGAZINE reader-only coupon is “giga2024“is. It is also possible to use it in conjunction with a 5,000 yen discount coupon, which is a great chance to purchase it for a whopping 100,000 yen less than 90,000 yen including tax.
Copy the title and URL of this article